7 Signs Your Car Needs a Wheel Alignment

Toowoomba Steering & Suspension • November 18, 2026

Does your car pull to one side, wear tyres unevenly or feel different to drive? Wheel alignment affects how your vehicle tracks and how its tyres wear. Here are seven signs worth checking, along with other possible causes.

1. Your car pulls to one side

Persistent pulling on a relatively level road can indicate an alignment issue. Road camber, tyre pressures, tyre faults and worn components can cause the same symptom. Check pressures first and have persistent pulling inspected.

2. The steering wheel sits crooked

If the steering wheel is off-centre when driving straight, the wheel angles may need checking. This can follow a pothole impact or steering repairs. A proper inspection helps identify the cause.

3. Tyres wear unevenly

Excessive wear on the inner or outer tread edges can be linked to incorrect alignment. Tyre pressure and suspension wear can also contribute. Have the cause checked before fitting replacements; see our tyre services.

4. The vehicle wanders

Frequent steering corrections or vague handling can be caused by wheel angles, but worn steering or suspension components are also possible. See our steering repair services if the vehicle feels unstable.

5. You've struck a pothole or kerb

A significant impact can affect alignment or damage mechanical parts. Watch for new noises, pulling, vibrations or a change in steering wheel position, and have the vehicle inspected if anything changes.

6. Steering or suspension parts were replaced

Replacing tie rods, control arms, struts or other geometry-related components can make an alignment necessary. Modified ride heights may also require attention. Learn about our suspension services.

7. The car feels different after new tyres

Pulling, vibration or unusual handling after fitting tyres deserves investigation. Tyre characteristics, pressure, alignment and balance can all contribute. Our wheel balancing service addresses a different problem from alignment.

Wheel alignment versus wheel balancing

Alignment checks wheel angles and adjusts them where possible. Balancing corrects uneven weight distribution in a wheel and tyre assembly to reduce vibration. Neither is a substitute for diagnosing worn or damaged parts.

When should alignment be checked?

Follow your vehicle manufacturer's advice and consider an inspection when you notice unusual tyre wear, pulling, an off-centre wheel, a significant impact, or after relevant suspension work. There is no universal interval for every vehicle.

Wheel alignment in Toowoomba

Toowoomba Steering & Suspension has supported local drivers since 1975. Whether you drive a car, ute or 4WD, explore our wheel alignment services or contact TSS to discuss your vehicle.

Recent Posts

By Toowoomba Steering & Suspension • November 18, 2026
Understand GVM upgrades for Australian 4WDs and utes, including payload, towing considerations and approvals. Practical advice from TSS Toowoomba.
By Toowoomba Steering & Suspension • November 18, 2026
What affects the cost of a 4WD suspension lift in Australia? Learn about kit types, fitting, alignment and choosing the right setup with TSS Toowoomba.